Figure 12: Screw On The System Mounted Rails - Mellanox Technologies SX10XX Hardware User Manual

 Installing the system slides on the system
Place the ESD mat on the floor where you will be working, and put on the ESD strap. Make
Step 1.
sure the ESD strap is touching your skin and that the other end is connected to a verified
ground.
Screw the two systems mounted rails to the system, using six flat head screws per rail.
Step 2.
 Install the two system frame into the rack.
Slide the frame slides into the frame.
Step 1.
20 Mellanox Technologies

Figure 12: Screw on the System Mounted Rails

Installation