Network Setup - Fixed Ip Address - HMS Netbiter EasyConnect User Manual

Installation on an Ethernet Network

7.2 Network Setup - Fixed IP Address

Fixed IP address settings for the Netbiter EasyConnect Gateway must be configured using
the IPconfig utility available from www.netbiter.com/support.
1. Start IPconfig and double‐click on the unit you wish to configure.
(MAC = the System ID for the gateway)
2. Set DHCP to Off, then enter the IP address and the other parameters as required.
Contact your network administrator if in doubt.
3. Click the Set button to save the configuration.
Netbiter EasyConnect Gateway User Manual
34
Doc: HMSI-168-92 Rev: 3.10