Table of Contents
Advertisement
Local Configuration
9.5.3 WAN Settings
The WAN interface should be enabled when connecting to Netbiter Argos via Ethernet.
When DHCP addressing is enabled the unit will automatically receive the settings for IP
address, subnet mask, default gateway, and DNS. If not using DHCP, these settings must
be entered manually. Contact your network administrator if in doubt.
9.5.4 Proxy Settings
If using a proxy server, check the box and enter the IP address, port and protocol to use.
9.5.5 LAN Settings
The LAN interface should be enabled when using EtherNet/IP or Modbus TCP applica‐
tions, or when using the Remote Access feature.
!
Do not connect the LAN and WAN ports to the same physical network.
Netbiter EasyConnect Gateway User Manual
46
Doc: HMSI-168-92 Rev: 3.10
Advertisement
Table of Contents
Need help?
Do you have a question about the Netbiter EasyConnect and is the answer not in the manual?
Questions and answers