Network Setup - Proxy Server; Network Setup - Fixed Ip Address - HMS Netbiter EasyConnect EC150 User Manual

9.2 Network Setup - Proxy Server

For information on how to configure the Netbiter EasyConnect Gateway to pass a proxy server, please
see page 52 in the chapter on Local Configuration.

9.3 Network Setup - Fixed IP Address

Setting a fixed IP address for the Netbiter EasyConnect Gateway can be done with the help of the
Nebiter Config utility, which is available from support.netbiter.com.
Start the utility and double-click on the required unit, as in the example below.
This will open the dialog for setting the IP
address and the related settings, as shown here.
Set the IP address and make the other required
settings. You may need to contact the network
administrator for this information.
When finished, click the Set button.
Netbiter EasyConnect
Doc.Rev. 2.10
Installation on an Ethernet Network 46
Doc.ID. HMSI-168-92