Firmware Update; Using Netbiter Update (Ec150/250) - HMS Netbiter EasyConnect User Manual

Firmware Update

10. Firmware Update
Alternative Methods
The easiest way to perform a firmware update is from the Netbiter Argos web pages. Please
refer to the Netbiter Argos User Manual for instructions.
If Netbiter Argos cannot be used, the firmware update can also be carried out via the local
configuration web pages. See "Local Configuration" on page 38.
If none of the above methods can be used, it is also possible to update the firmware in
EC150 and EC250 via a connection to a local PC using the free tool Netbiter Update.

10.1 Using Netbiter Update (EC150/250)

Requirements
• Null‐modem cable
• PC with COM port
1. Download Netbiter Update from www.netbiter.com/support to your PC.
2. Connect a null‐modem cable between the COM port on your PC and the 9‐pin D‐sub
connector on the Netbiter gateway.
3. Start Netbiter Update.
COM Port should already be selected. Leave the Baudrate setting at Auto.
Netbiter EasyConnect Gateway User Manual
49
Doc: HMSI-168-92 Rev: 3.10