Activation; Adding A Gateway To Netbiter Argos - HMS Netbiter EasyConnect User Manual

Activation

6. Activation
Before the Netbiter EasyConnect Gateway can be used, it must be registered and activated
in Netbiter Argos. This can be done in one of two ways:
• By using the gateway to create a completely new user account in Netbiter Argos.
• By adding the gateway to an existing account in Netbiter Argos.
About Netbiter Argos
Netbiter Argos is a web‐based communications centre for all your connected Netbiter
EasyConnect gateways, accessible from any Internet connected browser. It is used for acti‐
vating and configuring your Netbiter gateways and provides access to control functions,
logs and stored data.

6.1 Adding a Gateway to Netbiter Argos

For more information on the installation process, please refer to the Installation Guide sup‐
plied with the gateway and to the Netbiter Argos Administration Manual.
The Netbiter Argos Administration Manual is available at www.netbiter.com/support.
Netbiter EasyConnect Gateway User Manual
32
Doc: HMSI-168-92 Rev: 3.10