Related Manuals for HMS Intesis WMP
Summary of Contents for HMS Intesis WMP
- Page 1 Mitsubishi Electric Centralized Controller TCP/ IP XML Gateway for the integration of Mitsubishi Elctric City Multi air conditioning system into Home Automation systems (WMP) USER MANUAL Issue date: 09/2020 r1.0 ENGLISH...
- Page 2 HMS Industrial Networks reserves the right to modify its products in line with its policy of continuous product development. The information in this document shall therefore not be construed as a commitment on the part of HMS Industrial Networks and is subject to change without notice.
- Page 3 Gateway for integration of Mitsubishi Electric City Multi air conditioning systems into Home Automation systems (WMP). ORDER CODE LEGACY ORDER CODE INMBSMIT050C000 ME-AC-MBS-50 INMBSMIT100C000 ME-AC-MBS-100 © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice 3 / 22...
-
Page 4: Table Of Contents
Set-up procedure ..........................17 5. Electrical & Mechanical Features ........................20 6. Dimensions ................................. 21 7. AC Unit Types compatibility..........................22 © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice 4 / 22... -
Page 5: Description
The aim of this integration is to monitor and control Mitsubishi Electric City Multi air conditioning system, remotely, from a Home Automation system. To do it so, Intesis communicates with Intesis WMP protocol, allowing controlling and update the signals requested from the Home Automation hub. -
Page 6: Functionality
Number of groups that can be controlled through Intesis * There are different models of Intesis WMP – Mitsubishi Electric Centralized Controller each one with different capacity. The table above shows the capacity for the top model (with maximum capacity). -
Page 7: Intesis Wmp Interface
2. Intesis WMP interface In this section, a common description for all Intesis WMP series gateways is given, from the point of view of the Home Automation system which is called from now on internal system. Connection with the Mitsubishi Electric CC is also called from now on external system. -
Page 8: Connections
Connect a USB storage device (not HDD) if required. Check the user manual for more information. Ensure proper space for all connectors when mounted (see IMENSIONS © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice... -
Page 9: Power Device
Ethernet: Using the Ethernet port of Intesis. • USB: Using the console port of Intesis, connect a USB cable from the console port to the PC. © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice... -
Page 10: Set-Up Process And Troubleshooting
Ethernet port of the gateway and the Mitsubishi Centralized Controller with Ethernet connected to the gateway. Connectors, connection cables, PC for the Configuration Tool usage and other auxiliary material, if needed, are not supplied by Intesis for this standard integration. Items supplied by HMS Networks for this integration are: • Intesis gateway. •... -
Page 11: Configuration Tab
In this section it is possible to configure the different settings for the USB host port. 4.2.4. Home Automation (WMP) system configuration These are the settings available for the Home Automation system (WMP communication): © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice... -
Page 12: Mitsubishi Electric Configuration
Set parameters for the connection with Mitsubishi Electric installation. Figure 4.4 Intesis MAPS Mitsubishi Electric configuration tab Centralized controller settings © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice 12 / 22... - Page 13 Figure 4.6 Intesis MAPS Selection of active groups in Centralized Controller By pressing the ‘Scan’ button, ‘Discover Controller Groups’ window will appear: © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice...
- Page 14 Once the list of active groups is filled, parameters for each group must be configured. For doing so, select each group in the list: © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice...
- Page 15 Please note that the scan is taking the configiguration of “Unit Type”, “Num of Fan Speeds” and “URC Controller” automatically so you might not need to modify these parameters after performing a scan. © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com...
-
Page 16: Signals
2.- Go to tab ‘Receive / Send’ of MAPS, and in Send section, press Send button. Intesis will reboot automatically once the new configuration is loaded. © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice... -
Page 17: Diagnostic
Figure 4.12 Diagnostic More information about the Diagnostic section can be found in the Configuraion Tool manual. 4.2.9. Set-up procedure © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice 17 / 22... - Page 18 Automationhhub or controller and/or the ME centralized controller, check that those are operative: check the baud rate, the communication cable used to connect all devices and any other communication parameter. © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com...
- Page 19 Home Automation (WMP) – Mitsubishi Electric CC Intesis User Man r1.0 EN Figure 4.13 Enable COMMS © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice 19 / 22...
-
Page 20: Electrical & Mechanical Features
ON: 120 Ω termination active Switch B Off: 120 Ω termination inactive (default) (SWB) Position 2-3: ON: Polarization active Off: Polarization inactive (default) © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice 20 / 22... -
Page 21: Dimensions
Recommended available space for its installation into a cabinet (wall or DIN rail mounting), with space enough for external connections 100 mm (h) 100 mm (w) 130 mm (d) © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice 21 / 22... -
Page 22: Ac Unit Types Compatibility
User Man r1.0 EN 7. AC Unit Types compatibility The gateway is compatible with Mitsubishi Electric City Multi systems. © HMS Industrial Networks S.L.U. - All rights reserved https://www.intesis.com This information is subject to change without notice 22 / 22...
Need help?
Do you have a question about the Intesis WMP and is the answer not in the manual?
Questions and answers