Table of Contents
Advertisement
Available commands are listed below.
P
Set a policy index number.
Press "P" to change the command prompt to "Enter policy index>." Enter a policy
index number.
C
Set an index number of applicable classifier.
Press "C" to change the command prompt to "Enter classifier index>." Enter an
index number of applicable classifier.
S
Set a sequence number.
Press "S" to change the command prompt to "Enter policy sequence>." Enter a
sequence number.
I
Set an index number of applicable In-profile.
Press "I" to change the command prompt to "Enter in-profile index>." Enter an
index number of applicable in-profile.
O
Set an index number of applicable Out-profile.
Press "O" to change the command prompt to "Enter in-profile index>." Enter an
index number of applicable in-profile.
L
Set an index number of applicable port list.
Press "L" to change the command prompt to "Enter port list index>." Enter an
index number of applicable port list.
A
Apply the set contents. If not applied here, setting is not enabled.
Q
Return to the previous menu.
146
Advertisement
Table of Contents
