Table of Contents
Advertisement
4.6.8.d
Displaying all MAC addresses
On the Forwarding Database Information Menu, pressing "M" opens the
Display MAC Address by MAC screen, as shown in Fig. 4-6-20. In this screen,
you can display all the MAC address tables in this Switching Hub.
PN23249K/PN23249A Local Management System
Forwarding Database Menu -> Display MAC Address by MAC
Age-Out Time: 300 Sec.
MAC Address
-----------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Command>
Enter the character in square brackets to select option
Screen Description
Age-Out Time:
Displays the age-out time to store MAC address entries in forwarding
database. It is equal to the time after receiving the last packet. The
factory default setting is 300 seconds (5 minutes).
MAC Address
Displays the all MAC address entries.
Port
Displays the MAC address entries at each port.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next port.
P
Display the previous page.
Press "P" to display the previous port.
A
Set a time to store MAC address.
Press "A." The command prompt changes to "Enter Age-Out time>." Enter Age-Out
time with a value of 10 to 1000000 by seconds.
Q
Return to the previous menu.
Port
----
Set [A]ge-Out Time
[Q]uit to previous menu
Fig. 4-6-20 Displaying all MAC addresses
66
Advertisement
Table of Contents
