Mst Instance Advanced Configuration - Panasonic M24PWR Operation Manual

4.7.4.e. MST Instance Advanced Configuration
On the MSTP Instance Configuration, pressing "M" and entering MST
instance ID open the MST Instance Configuration screen, as shown in Fig.
4-7-20. On this screen, you can do advanced configuration of MST instance.
PN23249K/PN23249A Local Management System
MST Instance Configuration -> MST Instance Configuration
MSTI Root Port:
MSTI Root Cost:
MSTI Regional Root: 800A 00C08Fxxxx MSTI Bridge ID:
-------------------------------- <COMMAND> -----------------------------------
Set MSTI Bridge Pr[i]ority
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-7-20 Advanced Setting of MST Instance
Screen Description
MSTI Root Displays a root port number of MST instance.
Port:
MSTI Root Displays a root path cost value of MST instance.
Cost:
Time Since Displays elapsed time (sec.) from changing configuration of spanning
Topology tree.
Change:
Topology Displays the number of changes in configuration of spanning tree.
Change
Count:
MSTI Regional Displays bridge ID of the regional root bride of MST instance.
Root:
MSTI Bridge Displays bridge ID of MST instance.
ID:
Available commands are listed below.
I Set bridge priority of MST instance.
0 Time Since Topology Change: 0
0 Topology Change Count:
112
Sec.
0
8000 00C08Fxxxx