Table of Contents
Advertisement
Available commands are listed below.
I
Set the In-profile index number.
Press "I" to change the command prompt to "Enter in-profile action index>."
Enter 1 to 65535 for index number.
D
Set deny/permit of packet.
Press "D" to change the command prompt to "Select Deny/Permit (1-2)>." To
deny, "1." To permit, select "2."
S
Set DSCP value to be marked.
Press "S" to change the command prompt to "Enter DSCP value>." Enter from 0
to 63 for DSCP marking value.
P
Set precedence value to be marked.
Press "P" to change the command prompt to "Enter ToS precedence value>."
Enter from 0 to 7 for Precedence marking value.
C
Set CoS value to be marked.
Press "C" to change the command prompt to "Enter CoS value>." Enter from 0 to
7 for CoS marking value.
A
Apply the set contents. If not applied here, the setting is discarded.
Q
Return to the previous menu.
136
Advertisement
Table of Contents
