Table of Contents
Advertisement
M Set ICMP type to be filtered. (* Protocol needs to be set to ICMP.)
Press "M" to change the command prompt to "Enter ICMP type>." Enter ICMP
type in a range from 0 to 18.
Y
Set TCP SYN Flag to be filtered. (* Protocol needs to be set to TCP.)
Press "Y" to change the command prompt to Set TCP SYN flag (Y/N)>." To filter
by TCP SYN flag, press "Y." For no filtering or to cancel filtering, press "N." If
filtered, True is displayed. If not filtered, False is displayed.
A
Apply the set contents. If not applied here, set contents are not enabled.
Q
Return to the previous menu.
128
Advertisement
Table of Contents
