Panasonic M24PWR Operation Manual page 157

Operational Displays the operation status of controlled direction by IEEE 802.1X
Control function.
Direction
Both
In
Administrative Displays the administrative status of controlled direction by IEEE
Control 802.1X function.
Direction
Both
In
Per Port Re-auth Displays whether the periodic re-authentication is enabled or disabled.
Enabled
Disabled
Current PVID Displays a current allocated PVID.
Dynamic VLAN Displays the dynamic VLAN operation status.
Disabled
<VLAN ID>
Guest Access Displays the Guest Access application conditions.
Mode
Timeout
Auth Fail
Both
Transmit Period The number of seconds to wait before requesting the client to
reattempt authentication. The factory default setting is 30 seconds.
Max Request The maximum number of times of retransmitting an authentication
request. The factory default setting is 2 times.
Supplicant Displays the timeout for the client. The factory default setting is 30
Timeout seconds.
Quiet Period The number of seconds to wait before reattempting a failed
authentication The factory default setting is 60 seconds.
Serv Timeout Timeout for the authentication server The factory default setting is 30
seconds.
Re-auth Period Periodic re-authentication time interval The factory default setting is
3600 seconds.
Guest VLAN ID Displays the VLAN ID applied to Guest Access. When Guest Access is
disabled, the field displays "----."
Default VLAN ID Displays the VLAN ID applied when the Port Control setting is changed
from Auto to Force Authorized or Force Unauthorized. The default
VLAN ID is also applied when VLAN information cannot be obtained
from the authentication server although the dynamic VLAN is enabled
and the authentication succeeded.
Unless the client is authenticated, this Switching Hub does
not send or receive packets from the port.
Unless the client is authenticated, this Switching Hub does
not receive packets from the port.
Unless the client is authenticated, this Switching Hub does
not send or receive packets from the port.
Unless the client is authenticated, this Switching Hub does
not receive packets from the port.
The periodic re-authentication is performed.
The periodic re-authentication is not performed. (Factory
default setting)
The dynamic VLAN function is disabled.
The dynamic VLAN function is enabled, and displays the
allocated VLAN ID.
Guest Access is applied when a Supplicant Timeout
occurs.
Guest Access is applied when authentication fails.
Guest Access is applied when either the Timeout or Auth
Fail condition is matched.
157