Table of Contents
Advertisement
4.6.8.b. Setting learning mode of MAC address
On the Forwarding Database Information Menu, pressing "A" opens the
MAC Learning Menu screen, as shown in Fig. 4-6-18. In this screen, you can
set a learning mode of MAC address by port.
PN23249K/PN23249A Local Management System
Forwarding Database Menu -> MAC Learning Menu
Port
MAC Learning
------ ------------
1
Auto
2
Auto
3
Auto
4
Auto
5
Auto
6
Auto
7
Auto
8
Auto
9
Auto
10
Auto
11
Auto
12
Auto
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
Command>
Enter the character in square brackets to select option
Screen Description
Port
Displays a port number.
MAC Learning
Displays a learning method of MAC address.
Available commands are listed below.
N
Display the next page.
Press "N" to display the next port.
P
Display the previous page.
Press "P" to display the previous port.
S
Switch learning mode.
Press "S." The command prompt changes to "Select Port Number to be changed>."
Enter a port number you wish to change the setting. Then, the command prompt
changes to "Change MAC Learning Mode for port # (specified port number)>."
Enter "A" when learning automatically, or "D" when not learning MAC Address.
Q
Return to the previous menu.
Note: When IEEE802.1X port base authentication function and MAC base
authentication function are activated, the MAC Learning Mode for a
port cannot be disabled in the MAC Learning Menu.
[S]et MAC Learning Mode
[Q]uit to previous menu
Fig. 4-6-18 Learning MAC address
63
Advertisement
Table of Contents
