Table of Contents
Advertisement
4.7.9.c. Force Authorized MAC Configuration
Menu
On the 802.1x Access Control Configuration screen, pressing "F" opens the
Force Authorized MAC Configuration Menu as shown in Fig. 4-7-46. On this
screen,
you
can
authorized/unauthorized without IEEE 802.1X authentication.
PN23249K/PN23249A Local Management System
802.1x Access Control Configuration -> Force Authorized MAC Configuration Menu
MAC Address
----------------- ---- ------------ -------------------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
Pre[v]ious Page
Command>
Enter the character in square brackets to select option
Fig. 4-7-46 Force Authorized MAC Configuration
Screen Description
MAC Address
Displays the MAC address of a client to be authorized/unauthorized for
access without authentication.
Mask
Displays the mask of the specified MAC address.
Auth Status
Displays the status of the specified authentication.
Force
Unauthorized
Force Authorized
Port List
Displays the port to which the registered MAC address is applied.
configure
MAC
Mask Auth Status
Port List
Add/Del MAC [A]ddr
Set [M]ask Bit
The access control function is disabled. All
authentication requests from clients are ignored.
The access control function is disabled. The port is made
accessible without authentication. (Factory default
setting)
163
addresses
of
terminals
Sea[r]ch MAC Address
[Q]uit to previous menu
to
be
Advertisement
Table of Contents
