Keithley 2016 User Manual page 158

5-16 SCPI Command Reference
Table 5-7 (cont.)
SENSe command summary
Command
:PERiod
:APERture<n>
:APERture?
:THReshold
:VOLTage
:RANGe <n>
:RANGe?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:DIGits?
:DIODe
:CURRent
:RANGe
[:UPPer] <NRf>
[:UPPer]?
:CONTinuity
:THReshold <NRf>
:THReshold?
:DISTortion
:RANGe
[:UPPer] <n>
[:UPPer]?
:AUTO <b>
:AUTO?
:DIGits <n>
:DIGits?
:AVERage
:TCONtrol <name>
:TCONtrol?
:COUNt <n>
:COUNt?
:STATe <b>
:STATe?
:TYPE
:TYPE?
Description
Path to configure period.
Sets aperture for period measurements (0.01 to 1.0s)
Query frequency period aperture
Path to select the threshold voltage range:
Select threshold range (0 to 1010).
Query threshold range.
Specify reference (0 to 1).
Enable or disable reference.
Query state of reference.
Use input signal as reference.
Query reference value.
Specify measurement resolution (4 to 7).
Query resolution.
Paths to configure diode test:
Path to select range.
Select range (0 to 1e-3)
Query range.
Path to configure continuity test:
Set threshold resistance (1 to 1000).
Query threshold resistance.
Path to configure total harmonic distortion.
Path to configure measurement range.
Select range (0 to 757.5).
Query range.
Enable or disable auto range.
Query auto range.
Specify measurement resolution (4 to 7).
Query resolution.
Path to configure and control the filter.
Select filter type (MOVing or REPeat).
Query filter type.
Specify filter count (1 to 100).
Query filter count.
Enable or disable filter.
Query state of digital filter.
Select distortion measurement type (THD, THDN,
SINAD).
Query distortion measurement type.
Default
SCPI
parameter
1.0s
10
0
OFF
7
1e-3
10
757.5
ON
6
(Note)
10
OFF