Keithley 2016 User Manual page 152

5-10 SCPI Command Reference
Table 5-4
FORMat command summary
Command
:FORMat
[:DATA] <type>[,<length>]
[:DATA]?
:ELEMents <item list>
:ELEMents?
:BORDer <name>
:BORDer?
Table 5-5
OUTPut command summary
Command
:OUTPut
[:STATe] <b>
[:STATe]?
:FREQuency <NRf>
:FREQuency?
:IMPedance <name>
:IMPedance?
:AMPLitude <NRf>
:AMPLitude?
:CHANnel2
[:SHAPe]
[:SHAPe]?
:LIST <apml#1-NRf,
freq#1-NRf...>
:LIST?
:APPend
:DELay <NRf>
:DELay?
:ELEMents <name>
:ELEMents?
:DATA?
:POINts?
:MODE <name>
:MODE?
Description
Select data format: (ASCii, SREal or DREal).
Query data format.
Specify data elements: (READing, CHANnel, and UNITs).
Query data elements.
Select binary byte order: (NORMal or SWAPped).
Query byte order.
Description
Path to configure sine wave output.
Enable or disable sine wave output.
Query state of sine wave output.
Set sine wave output frequency (10 to 20000).
Query sine wave output frequency.
Set sine wave output impedance (OHM50, OHM600, HIZ).
Query sine wave output impedance.
Set sine wave output amplitude (0 to 9.5 for HIZ, 0 to 4.75
for others).
Query sine wave output amplitude.
Set shape of channel 2 output (ISINE or PULSE).
Query shape of channel 2 output.
Sets the sweep list points (maximum 50, append up to
200).
Query the sweep list points.
Appends points to end of list (50 points at a time).
Sets source settling time in seconds.
Query source settling time.
Sets reading elements to be returned
(DISTortion, AMPLitude)
Query the reading elements to return by :DATA?
Query results of sweep (returns in format set by ELEM).
Query the number of points in the sweep list.
Sets output mode (FIXED, LIST).
Query output mode.
Default
SCPI
parameter
√
ASCii
√
READing
√
SWAPped
√
Default
SCPI
parameter
√
√
OFF
√
60
OHM50
√
0.5
0s
DIST
FIXED