Checking 2-Stroke Oil Level; Priming Oil Pump - Husqvarna 250 XC TPI 2021 Owner's Manual

17.2

Checking 2-stroke oil level

Warning
Engine failure The engine will not be lubricated unless there is 2-stroke oil in the oil tank.
If the oil level warning light lights up, the 2-stroke oil is sufficient for the remaining tank of fuel.
–
As soon as the oil level warning light lights up, ride for no longer than until the remaining fuel in the
tank is depleted.
–
At the next opportunity add 2-stroke oil before you refuel.
–
Time the oil pump if the 2-stroke oil hose has been removed or the 2-stroke oil tank has been fully
depleted in error.
17.3

Priming oil pump

Warning
Engine failure The engine will not be lubricated unless there is 2-stroke oil in the oil tank.
If the oil level warning light lights up, the 2-stroke oil is sufficient for the remaining tank of fuel.
–
As soon as the oil level warning light lights up, ride for no longer than until the remaining fuel in the
tank is depleted.
–
At the next opportunity add 2-stroke oil before you refuel.
–
Time the oil pump if the 2-stroke oil hose has been removed or the 2-stroke oil tank has been fully
depleted in error.
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
Main work
–
Check the 2-stroke oil level in the oil tank.
Info
For one tank of fuel, the 2-stroke oil tank must be filled
up to at least the upper edge
The 2-stroke oil tank must be completely filled if possible.
» If the 2-stroke oil level is too low:
V01688-10
–
Add 2-stroke oil. (
Condition
The engine is off.
Preparatory work
–
Stand the motorcycle upright on a horizontal surface.
–
Check 2-stroke oil level. (
–
Remove the seat. (
SERVICE WORK ON THE ENGINE 17
A
.
p. 31)
p. 115)
p. 59)
115