To Increase Or Decrease Headroom - Sun Microsystems SPARC Enterprise M4000 User Manual

b. Enter the number of licenses reserved for each domain.
3. Verify the allocation with the showcod command.

To Increase or Decrease Headroom

▼
1. Log in to the XSCF console with platadm privileges.
2. Type the showcod command.
For example:
XSCF> showcod
Chassis HostID: 80e3e446
PROC RTUs installed: 10
PROC Headroom Quantity: 0
PROC RTUs reserved for domain 0: 4
PROC RTUs reserved for domain 1: 0
PROC RTUs reserved for domain 2: 0
PROC RTUs reserved for domain 3: 0
3. Type the setcod command.
For example:
XSCF> setcod headroom
where headroom can be a number from 1 to 4. For example:
XSCF> setcod 4
WAARNING: Using headroom requires you to install license key(s)
within 30 days.
4. Verify the headroom quantity is correct by typing the showcod command.
For example, if you entered 4 as the headroom number, the output would be
similar to:
XSCF> showcod
Chassis HostID: 80d88800
PROC RTUs installed: 8
PROC Headroom Quantity: 4
...
10 Sun SPARC Enterprise Mx000 Servers Capacity on Demand (COD) User's Guide • September 2007
The currently reserved number appear in parentheses. Do not exceed the
number of available licenses. To leave a reservation unchanged, press Return.
Do you agree? [y|n]: y