Table of Contents
Advertisement
User's Manual
Table 6-1: SIP General Parameters (continues on pages 81 to 81)
Parameter
Prack
[prack-mode [disable |
require | support]]
Early Media
[[no]earlyMedia]
Session Expires
[sessionExpires <val>]
Min Session Expires
[minSessionExpires <val>]
Asserted Identity Mode
[asserted-identity-mode
<none | pAssertedIdentity>
Use rPort
[[no]useRPort]
SIP Transport Type
[transport <TCP | UDP>]
SIP local port
[localPort <num>]
SIP proxy port
[proxyPort <num>]
Use Source Number as
Display Name
[manipulation sip-display-
name
[no] copy-from-src]
Using CLI
To change the SIP general parameters using CLI:
1.
Login to the system.
2.
Change to the configuration mode.
3.
From the main configuration mode, change to the "gateway sip" mode.
4.
Use the commands in square brackets ([]) to change the parameter values.
Version 2.2
Description
Defines the PRACK behavior.
Disable = 100rel is not supported and not required.
Supported = 100rel is added to the supported header (default).
Required = 100rel is added to the supported and required header.
Enable or disable early media.
Enabled = use 183 response
Disabled = use 180 alerting response (default).
Each time the timer expires, the session is refreshed using a RE-INVITE.
0 = disabled (default)
Valid range is 10 to 3600 sec.
The value used in the Min-SE header filed.
0 = disabled
Valid range is 10 to 3600 sec.
The default value is 90.
Defines the Asserted Identity Mode.
None = system does not use the P-Asserted Identity header
PAssertedIdentity
Defines whether or not to add the rPort value to the via headers. This defines the
behavior for symmetric response routing.
Valid options include:
Enable
Disable
Defines if UDP or TCP is used as SIP transport.
Valid options include:
UDP (default)
TCP
Defines the UDP local port.
Valid range is 1 to 8,000. The default is 5060.
The SIP stack sends requests to this port.
Valid range is 1 to 32767. The default is 5060.
Note: There is no restriction on the proxy port.
If enabled, the SIP source name is copied to the display name.
81
6. Configuring the MediaPack
July 2007
Advertisement
Table of Contents
