Figure 3-10: Trunk Lifeline Cabling; Figure 3-11: Single Isdn Subscriber Lifeline Cabling - AudioCodes MediaPack MP-40x series User Manual

Cpe & digital access gateway
Table of Contents

Advertisement

User's Manual
Notes:
Version 2.2

Figure 3-10: Trunk Lifeline Cabling

Figure 3-11: Single ISDN Subscriber Lifeline Cabling

In the cable setup described above, the PSTN network is only
available upon a power outage. However, the Trunk interface that is
connected to the Lifeline port, can also be connected to an ISDN S/T
interface port (except S/T 0), by using an S-bus splitter. In such a
setup, the PSTN network is always available.
The ISDN phone must be configured with an MSN number(s) received
from the Service Provider.
The Lifeline cable setup can be reversed (i.e., the ISDN phone can be
connected to the Lifeline port, and the PSTN network can be
connected to the S/T 0 port). However, in such a configuration, the
ISDN phone can only be used upon a power outage.
The Lifeline feature is only supported by certain MediaPack models
(i.e., MP-404 /BRI /ST /AC /LL and MP-408 /BRI /ST /AC /LL) and
therefore, only these models provide a Lifeline port.
35
3. Installing the MediaPack
July 2007

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediapack mp-40 series

Table of Contents