Table 6-1: Sip General Parameters - AudioCodes MediaPack MP-402 User Manual

Table of Contents

Advertisement

Parameter
Prack
[prack-mode [disable |
require | support]]
Early Media
[[no]earlyMedia]
Session Expires
[sessionExpires <val>]
Min Session Expires
[minSessionExpires <val>]
Asserted Identity Mode
[asserted-identity-mode
<none | pAssertedIdentity>
Use rPort
[[no]useRPort]
SIP Transport Type
[transport <TCP | UDP>]
SIP local port
[localPort <num>]
SIP proxy port
[proxyPort <num>]
Use Source Number as
Display Name
[manipulation sip-display-
name
[no] copy-from-src]
Using CLI
To change the SIP general parameters using CLI:
1.
Login to the system.
2.
Change to the configuration mode.
3.
From the main configuration mode, change to the "gateway sip" mode.
4.
Use the commands in square brackets ([]) to change the parameter values.
SIP User's Manual

Table 6-1: SIP General Parameters

Description
Defines the PRACK behavior.
Disable = 100rel is not supported and not required.
Supported = 100rel is added to the supported header (default).
Required = 100rel is added to the supported and required header.
Enable or disable early media.
Enabled = use 183 response
Disabled = use 180 alerting response (default).
Each time the timer expires, the session is refreshed using a RE-INVITE.
0 = disabled (default)
Valid range is 10 to 3600 sec.
The value used in the Min-SE header filed.
0 = disabled
Valid range is 10 to 3600 sec.
The default value is 90.
Defines the Asserted Identity Mode.
None = system does not use the P-Asserted Identity header
PAssertedIdentity
Defines whether or not to add the rPort value to the via headers. This defines the
behavior for symmetric response routing.
Valid options include:
Enable
Disable
Defines if UDP or TCP is used as SIP transport.
Valid options include:
UDP (default)
TCP
Defines the UDP local port.
Valid range is 1 to 8,000. The default is 5060.
The SIP stack sends requests to this port.
Valid range is 1 to 32767. The default is 5060.
Note: There is no restriction on the proxy port.
If enabled, the SIP source name is copied to the display name.
MP-40x SIP MediaPack BRI Series
68
Document #: LTRT-53301

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediapack mp-408Mediapack mp-404

Table of Contents