Table 6-2: Sip Proxy And Registration Parameters (Continues On Pages 84 To 87) - AudioCodes MediaPack MP-40x series User Manual

Cpe & digital access gateway
Table of Contents

Advertisement

User's Manual
2.
Configure the Proxy and Registration parameters according to
3.
Click the Submit button to save your changes and to register to a Proxy / Registrar.
4.
To save the changes to the flash memory, refer to Section
Settings on the
Table 6-2: SIP Proxy and Registration Parameters (continues on pages 83 to 86)
Parameter
SIP Domain Name
[[no]domain]
Local Interface
[[no]bind <LAN|WAN>]
Proxy-Related Parameters
Enable Proxy
[[no]useProxy]
Primary Proxy
[[no]proxy 0 <IP|FQDN>]
First Fallback Proxy
[[no]proxy 1 <IP|FQDN>]
Second Fallback Proxy
[[no]proxy 2 <IP|FQDN>]
Third Fallback Proxy
[[no]proxy 3 <IP|FQDN>]
Redundancy Mode
[proxy-redundancy-mode
<parking|homing>]
Version 2.2
MediaPack' on page 146.
Description
Defines the host part of the to and from headers used in SIP requests.
Valid options include:
IP
FQDN
The SIP Stack uses this IP address in its control messages such as via and contact.
This parameter does not specify the interface used to send the packet. The outgoing
interface is determined by routing.
Valid options include:
LAN
WAN
Enables or disables proxy.
Valid options include:
Enable = Proxy is enabled.
Disable (default) = Proxy is not enabled. If proxy is disabled, all proxy-related
parameters are ignored.
The address of the primary and the three fallback proxies. If defined, messages are
sent to one of these addresses. If fallback proxies are used, keep alive must be
enabled.
Valid options include:
IP
FQDN
The address of the primary and the 3 fallback proxies. If defined, messages are sent
to one of these addresses. If fallback proxies are used, keep alive must be enabled.
IP
FQDN
The address of the primary and the 3 fallback proxies. If defined, messages are sent
to one of these addresses. If fallback proxies are used, keep alive must be enabled.
Valid options include:
IP
FQDN
The address of the primary and the 3 fallback proxies. If defined, messages are sent
to one of these addresses. If fallback proxies are used, keep alive must be enabled.
Valid options include:
IP
FQDN
Valid options include:
None (default) = no proxy redundancy
Parking = continue working with the currently active proxy
Homing = always try to use the primary proxy
83
6. Configuring the MediaPack
Table
6-2.
'Saving Configuration
July 2007

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediapack mp-40 series

Table of Contents