Picture (P - Bang & Olufsen BeoVision 7 Reference Book

44
Picture and sound settings are preset
from the factory to neutral values
which suit most viewing and listening
situations. However, if you wish, you
can adjust these settings to your
liking.
Adjust picture brightness, colour or
contrast. Sound settings include
volume, bass and treble.
Store your picture and sound settings
temporarily – until your television is
switched off – or store them
permanently.
For information about how to change
the picture format, refer to the
chapter 'Surround sound and Home
cinema' on page 10 in the Guide.
Adjust picture and sound settings
Adjust brightness, colour or contrast
Adjust the picture settings via the PICTURE
menu. Temporary settings are cancelled
when you switch off the television.
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
and press to highlight OPTIONS.
> Press GO to bring up the OPTIONS menu and
press to highlight PICTURE.
> Press GO to bring up the PICTURE menu.
> Press or to move through menu items.
> Press or to adjust the values.
> Press EXIT to store your settings until you
switch off the television, or ...
> ... press GO to store your settings permanently.
You can not adjust brightness or contrast when
using a projector connected to the television, or
when using the television in Home cinema mode.
To temporarily remove the picture from the screen,
press LIST repeatedly to display P.MUTE on Beo4,
then press GO. To restore the picture again, press
any source button, for example, TV. In order to
display P.MUTE on Beo4, you must first add it to
the Beo4 list of functions. For further information,
refer to the chapter 'Customise Beo4' on page 70.
PICTURE
.
....... .......
BRIGHTNESS
.
....... .......
CONTRAST
.
....... .......
COLOUR
.
....... .......
TINT
.
....... .......
SIZE
select
SIZE ... If you experience any irregularities along
the edges of the picture select SIZE and adjust.
For video sources using the VGA signal, the
following options appear as well:
HOR. SIZE ... Adjusts the picture size along the
horizontal axis.
VERT. SIZE ... Adjusts the picture size along the
vertical axis.
HOR. POSITION ... Adjusts the picture position
along the horizontal axis.
VERT. POSITION ... Adjusts the picture position
along the vertical axis.
Note that these four settings only apply for the
screen resolution in effect at the time you adjust
the settings.
GO