Bang & Olufsen BeoVision 7 Reference Book page 23

Connect and use a PC
IMPORTANT! Before connecting a PC to the
television, disconnect the television, the
computer, and all equipment connected to
the computer from the mains.
To connect a computer to the television ...
> Using the appropriate type of cable, connect
one end to the DVI or VGA output socket on
your computer, and the other end to the VGA or
HDMI socket on the television.
> To hear sound from the computer in the
speakers connected to the television, use the
appropriate cable and connect the sound
output on the computer to the R–L sockets on
the television.
> Reconnect the television, the computer, and all
equipment connected to the computer to the
mains. Remember, the computer must be
connected to a grounded wall outlet as
specified in its setting-up instructions.
If you have connected your PC to the VGA socket
on the television, you must register the PC to the
AV5 or AV6 socket in the CONNECTIONS menu. A
PC connected to the HDMI socket can be
registered to any of the AV sockets or socket
groups. For further information, refer to the
chapter 'Register additional video equipment' on
page 30.
Bring up the computer image on the screen
To see the computer picture on the screen, you
must bring it up with Beo4.
To bring up the computer picture ...
> Press LIST repeatedly until PC appears in the
Beo4 display
> Press GO to bring up the picture. You can then
operate the computer as you normally would.
Watch digital pictures on your screen
To watch your camera pictures, connect the
camera and switch the television on. The
television automatically registers the signal and
you can see the still pictures on the screen.
If the signal from the camera is switched off...
> Press LIST repeatedly to display CAMERA on
Beo4 and press GO.
In order to display CAMERA on Beo4, you must
first add it to the Beo4 list of functions. For further
information, refer to the chapter 'Customise Beo4'
on page 70.
23