Bang & Olufsen BeoVision 7 Reference Book page 64

64
The BeoLink system makes it possible
to distribute picture and/or sound to
other rooms throughout the house.
For example, you can connect your
television in the living room to
another video system or set of
speakers in another room, thereby
making it possible to 'move' the
picture or sound to other rooms.
If you have a BeoLink distribution
system installed, you can either use
your television in the main room,
such as a living room, or in a link
room, such as a study or bedroom.
Under certain circumstances, it may
be necessary to enter modulator
settings.
Distribute sound and picture with BeoLink
Link connections
ANT 1
RF Distribution
Amplifier
The main room television must be connected
to the link room system with a Master Link
cable:
> Connect the Master Link cable to the socket
marked MASTER LINK on the side connection
panel.
> If you want to distribute video signals as well,
connect an ordinary aerial cable to the socket
marked LINK TV on the main connection panel.
Then run the aerial cable to the RF Link
Amplifier and the Master Link cable to the link
room. Follow the instructions enclosed with the
link room equipment.
To the MASTER LINK socket on the
link room system
MASTER
LINK
LINK TV
OUT
Video signal distribution to link
rooms
If an audio system is already connected to the
Master Link socket and you wish to connect more
equipment, the Master Link cable must be split in
two and joined with the cable from the link room
using a special junction box. Contact your Bang &
Olufsen retailer for assistance.
Digital signals (HDMI) cannot be distributed from
a main room television to the link room system.