Bang & Olufsen BeoVision 7 Reference Book page 45

Hide thumbs Also See for BeoVision 7:
Table of Contents

Advertisement

Adjust volume, bass or treble
Sound settings are preset at the factory to
neutral values which suit most listening
situations. However, if you wish, you can
adjust these settings to your liking.
You can preset levels for sound volume, bass,
treble and up to two connected BeoLab 2
subwoofers.
You can switch the loudness feature on or off.
The loudness feature compensates for the
human ear's lack of sensitivity to high and
low frequencies. These frequencies are
boosted at low volume levels so that low
music becomes more dynamic.
In addition, you can preset two default
speaker combinations; one to be used each
time you switch on a video source in your
television, and one to be used each time you
switch on an audio source connected to your
television. You can still select a different
speaker combination any time you wish.
For further information about speaker
combinations, refer to the chapter 'Surround
sound and Home cinema' on page 10 in the
Guide.
To adjust sound ...
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
and press
to highlight OPTIONS.
> Press GO to bring up the OPTIONS menu and
press
to highlight SOUND.
> Press GO to bring up the SOUND SETUP menu.
ADJUSTMENT is already highlighted.
> Press GO to bring up the SOUND ADJUSTMENT
menu.
> Press
or
to select an item to adjust.
> Press
or
to adjust the values or choose a
setting.
> Press EXIT to store your settings until you
switch off your television.
> Press GO to store your settings permanently.
SOUND ADJUSTMENT
.
.......
.......
VOLUME
.
.......
.......
BASS
.
.......
.......
TREBLE
.
.......
.......
SUBWOOFER
LOUDNESS
ON
DEFAULT VIDEO
SPEAKER3
DEFAULT AUDIO
SPEAKER2
store
What's on the SOUND ADJUSTMENT menu ...
VOLUME ... Adjusts the volume level the TV uses
when you switch it on.
BASS ... Adjusts the bass level.
TREBLE ... Adjusts the treble level.
SUBWOOFER ... (only available if you have
connected one or two BeoLab 2 subwoofers)
Adjusts the sound level from the subwoofer. If
you have connected two subwoofers, the
adjustment applies to both of them.
LOUDNESS ... The loudness feature compensates
for the human ear's lack of sensitivity to high
and low frequencies. These frequencies are
boosted at low volume levels so that low music
becomes more dynamic. Loudness can be set to
ON or OFF.
DEFAULT VIDEO ... Set the speaker combination
you want to use when switching on a video
source in your television.
DEFAULT AUDIO ... Set the speaker combination
you want to use when switching on an audio
source in your television.
The content of the SOUND menu varies according
to what you have connected to the television.
45
GO

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents