Option Setting - Bang & Olufsen BeoVision 7 Reference Book

66
If you have BeoLink installed in your
home and choose to place your
television in a link room, you can
operate all connected systems
through the television and listen to
the sound in the link room.
You must follow the procedure described below
when you connect your television for use in a
link room:
1 Connect the link room television to the
mains.
2 Using the Beo4 remote control, program the
link room television to Option 6*.
3 Disconnect the link room television from the
mains.
4 Make the necessary connections.
5 Reconnect the link room television to the
mains.
BeoLink – Your television in a link room

Option setting

For your entire system to function properly, it
is essential that the television in the link
room is set to the correct Option before you
connect it to the system in the main room!
> While holding down the • button, press LIST.
> Let go of both buttons.
> Press LIST repeatedly to display OPTION? on
Beo4 and press GO.
> Press LIST repeatedly to display V.OPT on Beo4
and press 6*.
Link room
Main room
Option 6
*If you connect the television for use in a link
room where other link systems are already
connected, such as loudspeakers, you must set
the television to Option 5 instead.