Bang & Olufsen BeoVision 7 Reference Book page 27

The sequence of menus in first-time setup:
CONNECTIONS ... Select the type of equipment
you have connected to each socket group, the
sockets used, the product name, and the source
name. For further information about the
CONNECTIONS menu, refer to the chapter
'Register additional video equipment' on page
30.
SPEAKER TYPES ... In this menu, you are led
through a procedure in which each of your
connected Bang & Olufsen speakers make a
sound while that speaker is highlighted in the
menu. You then register the speaker type in the
menu. For further information about the
SPEAKER TYPES menu, refer to page 32 in the
chapter 'Loudspeaker setup – surround sound'.
TV SPEAKER ROLES ... In this menu, you can
select the function for each connected speaker
in your setup, such as front, back or surround.
As you highlight each speaker, a sound is
produced by the speaker. Check that the
speaker type highlighted in the menu matches
the speaker type making the sound. For further
information about the SPEAKER ROLES menu,
refer to page 33 in the chapter 'Loudspeaker
setup – surround sound'.
TV SPEAKER DISTANCE ... Enter the straight-line
distances from each speaker to your listening
position. For further information about the TV
SPEAKER DISTANCE menu, refer to page 34 in
the chapter 'Loudspeaker setup – surround
sound'.
SPEAKER LEVEL ... In this menu, you are to
calibrate the sound level for the connected
speakers. A calibration sound is produced
alternately in each speaker. Adjust the sound
level from all the connected speakers to match
the sound level from the centre speaker. You
can choose whether you want the sound
sequence to occur automatically or manually.
For further information about the SPEAKER
LEVEL menu, refer to page 35 in the chapter
'Loudspeaker setup – surround sound'.
SOUND ADJUSTMENT ... Adjust sound
characteristics, such as volume, bass, treble and
loudness. In addition, you can preset two
default speaker combinations; one to be used
each time you switch on a video source in your
television, and one to be used each time you
switch on an audio source connected to your
television. You can still select a different speaker
combination any time you wish. For further
information about the SOUND ADJUSTMENT
menu, refer to the chapter 'Adjust picture and
sound settings' on page 44.
STAND ADJUSTMENT ... Set the maximum angle
the television will turn – left and right, and tilt –
up and down. For further information about the
STAND ADJUSTMENT menu, refer to 'Calibrate
the motorised movement' on page 28.
STAND POSITIONS ... Set your preferred preset
positions for the television to turn to. For further
information about the STAND POSITIONS menu,
refer to the chapter 'Set positions for the
television to turn to' on page 46.
For information about where and how to connect
extra equipment, refer to 'Register additional
video equipment' on page 30 and the chapter
'Connection panels' on page 20.
27