Fine Tune (P; Fine-Tune Channels - Bang & Olufsen BeoVision 7 Reference Book

42
>> Edit TV channels

Fine-tune channels

You can fine-tune your TV channels if, for
example, you wish to adjust the frequency. .
> Press TV to switch on the television.
> Press MENU to bring up the SETUP menu and
press to highlight CHANNEL SETUP.
> Press GO to bring up the CHANNEL SETUP
menu and press to highlight FINE TUNE.
> Press GO to bring up the FINE TUNE menu.
CHANNEL is highlighted.
> Press or to select a channel to fine-tune.
> Press to highlight FINE and press
fine-tune the channel.
> Press to highlight SOUND and press
select a sound type – STEREO, MONO or SAP –
for the channel.
> Press GO to store the settings.
If you select CABLE BOX or OFF in the RF menu,
the EDIT CHANNELS and FINE TUNE menus are
inaccessible.
CHANNEL
FINE
SOUND
What's on the FINE TUNE menu ...
or to
CHANNEL ... Select a channel to fine-tune.
or to FINE ... Fine tune the frequency of a channel. You
can fine tune within the range of -8 – +8.
SOUND (mono, stereo or language) ... Several
types of sound may be available for different
programmes, mono, stereo or different
languages. On the relevant channel or
frequency select the options MONO, STEREO or
SAP.
Even though you store a type of sound/language,
you can switch between the various types while
watching a TV programme. For further
information, refer to the chapter 'Surround sound
and Home cinema' on page 10 in the Guide.
FINE TUNE
69
+3
STEREO
select
GO