Bang & Olufsen BeoVision 7 Reference Book page 16

16
For information about the connection
panels, refer to pages 20–22.
Set up the television
Handling your television
Never lift the television holding only the
front glass. The television is NOT designed to
stand on its own, it must be supported until
mounted on the chosen stand or bracket.
– Avoid placing your television in direct sun-
light or direct artificial light, such as a spot-
light, as this may reduce the sensitivity of
the remote control receiver. Also if the
screen is overheated, black spots may
appear in the picture. These spots disappear
again, once the television cools down to
normal temperature.
– Make sure that the television is set up,
placed and connected in accordance with
this Guide. To prevent injury, use Bang &
Olufsen stands or wall brackets only.
– The television is developed for indoor use
in dry, domestic environments only. Use
within a temperature range of 50–105°F
(10–40°C).
– Do not place any items on top of the tele-
vision.
– Always place your television on a firm and
stable surface.
– Do not attempt to open the television.
Leave such operations to qualified service
personnel.
Allow enough space below the screen for adequate
ventilation. Make sure not to cover the fans. If the
television is overheated a warning will appear on
the screen; switch the television to standby, not
off, in order for the television to cool down to
normal temperature.
If you have a motorised stand or a wall bracket,
leave enough space around the television to allow
it to turn and tilt freely.