Bang & Olufsen BeoVision 7 Reference Book page 56

56
About the V-CHIP menu ... *
The V-CHIP menu allows you to lock specific
television contents.
When you enter the V-CHIP menu, you can
lock (and later unlock) specific contents to avoid
others from watching the contents. Select
the contents you wish to lock. Whenever you
try to access locked contents, you are asked to
key in your V-Chip pincode.
If one content lock is released by the correct
V-Chip pincode all contents are open and
content lock will not be active again before
the system enters standby.
The V-Chip pincode system of the built-in
ATSC tuner is not the same as the pincode
system for your television, but it may be
easier for you, if you choose to use the same
code for both systems.
>> Settings and preferences of the digital tuner
Contents of the V-CHIP menu ...
Before you can change the setting in the V-CHIP
menu, you must enter the V-Chip pincode. The
default setting of the V-Chip pincode is 0000.
CHANGING PIN ... You can change your V-Chip
pincode at any time. Use 0 – 9 and enter a new
four-digit V-Chip pincode. Enter the new V-Chip
pincode again to confirm.
US RATING SETTING ... In the US RATING SETTING
menu you can apply the MPAA rating system or
the TV-PG system as parental control. Depending
on which system you choose options are:
– ALLOW ALL
– BLOCK ALL
– TV-Y, TV-Y7, TV-G, TV-PG, TV14, TV-MA
– FV, D, L, S, V
– P, PG, PG13, R, NC17, X
The default setting is ALLOW ALL.
*NOTE! The V-CHIP menu is not available in Korea.
CANADIAN RATING SETTING ... In the CANADIAN
RATING SETTING menu you can apply the English
classification system or the French classification
system as parental control. Depending on which
system you choose options are:
– ALLOW ALL
– BLOCK ALL
– E, C, C8+, G, PG, 14+, 18+
– E, G, 8+, 13+, 16+, 18+
The default setting is ALLOW ALL.
Should you forget your code ...
If you forget your V-Chip pincode, enter the V-CHIP
menu and key in '9999'. You must now enter a
new personal code.