Bang & Olufsen BeoVision 7 Reference Book page 67

Link room operation
When you are in the link room, you can
operate all connected systems with the Beo4
remote control.
Use sources only present in one of the
rooms ...
Press the button for the source
you wish to listen to
Operate the selected source as
usual
Use a source placed in the
main room – the source type
is present in both rooms ...
Press LIST repeatedly until LINK*
is shown in the Beo4 display
Press the button for the source
you wish to listen to
Operate the selected source as
usual
Use a source placed in the link
room – the source type is
present in both rooms ...
Press the button for the source
you wish to listen to
Operate the selected source as
usual
Listen to stereo sound in your link room ...
Usually sound distributed from a main room video
source, such as a set-top box, to the link room is
transmitted in mono. However, you can select
stereo sound:
RADIO Press to switch on the television
CD
DTV Press repeatedly until AV* is
shown in the Beo4 display
Press to activate a source
connected to the main room
television, such as a set-top box
LIST
While using this function,
LINK distribution of other main room
sources to other link room
DTV systems is not possible.
DTV
Main room
TV
LIST
AV
DTV
*To display LINK on your Beo4 remote control, you
must first add it to the Beo4 list of functions. Refer
to the chapter 'Customise Beo4' on page 70.
67
Link room