Picture Format - Bang & Olufsen BeoVision 7 Manual

Picture format

Your television always ensures you the best
possible picture. It automatically adapts the
picture so that it fills out as much of the
screen as possible. However, you can always
choose the format you prefer. When you
select a format yourself, the automatic
format selection is deactivated, until you
switch to a different channel or change
source.
Press repeatedly to display
FORMAT on Beo4
Press if you want to optimise the
picture, or ...
... press the number of the
desired picture format
If you have chosen Format 1 ...
Press or to select variations
of this format
If you have chosen Format 1
or Format 2 ...
Press or to move the
picture up and down
Press to leave the FORMAT
function
Picture formats to choose from
FORMAT 1 ... For standard TV pictures. Two
variations are available: Panoramic view (for the
largest picture) and 4:3.
FORMAT 2 ... For letter-box pictures. When you
select FORMAT 2, the picture is automatically
adjusted vertically. This ensures that channel
names or subtitles – if these appear in the
broadcasted picture – can be seen.
FORMAT 3 ... For genuine 16:9 wide-screen
LIST
pictures.
FORMAT
GO
1 – 3
EXIT
Switch to Home cinema
If a projector is connected, you can use your
Beo4 remote control and move the picture
from the television screen onto a projector
screen for a special occasion or movie.
Press repeatedly to display
FORMAT on Beo4
Press to switch between Home
cinema mode and ordinary TV
mode
Press to leave the function
11
LIST
FORMAT
0
EXIT