Bang & Olufsen BeoVision 7 Reference Book page 26

26
The setup procedure described here is
activated when the television is
connected to the mains and switched
on for the first time. You are led
through an automatic series of on-
screen menus in which you must
register the extra equipment you
have connected, such as a projector
and loudspeakers.
If you change your setup at a later
date, you can access the same menus
and update your settings.
First-time setup of your television
Overview of first-time setup
First-time setup of your television has three
main steps: registration of all connected
equipment, loudspeaker setup and sound
adjustment.
The first-time loudspeaker setup applies only
to the speakers you use while watching TV.
When first-time setup is complete, you can
then set up your loudspeakers for Home
cinema use. Switch on Home cinema and
bring up the appropriate menus as described
in the chapter 'Loudspeaker setup – surround
sound' on page 32.
For further information about Home cinema,
refer to the chapter 'Surround sound and
Home cinema' on page 10 in the Guide.
CONNECTIONS
SPEAKER TYPES
TV SPEAKER ROLES
TV SPEAKER DISTANCE
TV SPEAKER LEVEL
SOUND ADJUSTMENT
STAND ADJUSTMENT
STAND POSITIONS