Bang & Olufsen BeoVision 7 Reference Book page 17

Placement options
The television can be placed in several ways,
some are illustrated to the right. Please contact
your Bang & Olufsen retailer for further
information.
When you mount the television on one of the
floor stands or wall brackets, you can tilt the
television up and down, as well as turn it left
or right on some of the stands. Note, however,
that only some stands can be turned and
tilted with the Beo4 remote control, other
stands can only be tilted manually.
While mounting the television on the stand or
bracket, you can use the packaging to support
the products. This eases the mounting.
Once the loudspeaker and television are both
mounted on a stand or bracket, do not carry
them by holding the loudspeaker.
Placement of connection panels
1 Cover for sockets for temporary connection,
such as camera and headphones sockets.
Push in to open, push again to close.
2 Mounting bracket for stand or wall bracket.
1
3 Covers for the connection panel. Here you
also find the mains supply connection. Pull
2
out at the bottom to remove.
3
17