Bt-Only Features - Datalogic Gryphon I GD4100 Product Reference Manual
Gryphon series general purpose handheld linear imager or laser barcode readers
Hide thumbs
Also See for Gryphon I GD4100:
- Reference manual (428 pages) ,
- Product reference manual (370 pages) ,
- Quick reference manual (40 pages)
Table of Contents
Advertisement
BT-Only Features
BT Pin Code
This option specifies the 4-character pin code to be used for authentication of the BT
Security Mode"on page 277
To set the pin code:
1. Determine the desired characters. For example, D254.
2. Convert the characters to hexidecimal using the
3. Go to
4. Scan the barcode: SELECT BT PIN CODE.
5. Scan the appropriate alpha-numeric characters from the keypad in
6. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming
This completes the procedure. See Table
Table 47. BT Pin Code Setting Examples
STEP
ACTION
1
Desired Setting
Convert the characters to
2
hexadecimal
3
Scan ENTER/EXIT PROGRAMMING MODE
4
Scan SELECT LABEL GONE TIMEOUT SETTING
Scan the Eight Alpha-Numeric
5
Characters From
Keypad
6
Scan ENTER/EXIT PROGRAMMING MODE
Product Reference Guide
must first be enabled to require the pin code.
this manual. In the case of the example, the hexidecimal equivalents would be:
D = 0x44, 2 = 0x32, 5 = 0x35, and 4 = 0x34
page 278
and scan the ENTER/EXIT PROGRAMMING MODE barcode to
enter Programming Mode.
representing the hexidecimal entries which was determined in the steps above. You will
hear a two-beep indication after the last character.
If you make a mistake before the last character, scan the CANCEL barcode to
abort and not save the entry string. You can then start again at the beginning.
Mode.
Changing the pin code setting will unlink the devices. If the Automatic Configu-
ration Update is set to the default enabled setting, the devices must only be
relinked. If the Automatic Configuration Update is set to the disabled setting,
the Pin Code setting must also be updated in the Base Station using Aladdin.
After the Base Station has been updated, the devices must be relinked.
1234
31 32 33 34
Appendix D
31323334
ASCII Chart
47
for examples of how to set this feature.
EXAMPLES
D254
1359
44 32 35 34
31 33 35 39
44323534
31333539
RF Features
link.
"BT
on the inside back cover of
Appendix D
Keypad,
STOR
53 54 4F 52
53544F52
315
Advertisement
Table of Contents
