Setup
3. The stand can now be repositioned in either horizontal or standing position.
Connecting the Base Station
Figure 8 shows how to connect the Base Station to a terminal, PC or other host device. Turn off
the host before connection and consult the manual for that equipment (if necessary) before
proceeding. Connect the interface cable before applying power to the Base Station.
Base Station Connection and Routing:
connectors into their respective ports in the underside of the Base Station (see Figure 8). Then
connect to an AC Adapter, and plug the AC power cord into the (wall) outlet.
Figure 8. Connecting the Base Station
22
Standing
Gryphon Mobile can also be Powered by the Terminal. The external power supply is
recommended but not necessary. When powered by the Terminal, the battery char-
ger is automatically set as Slow charge.
I/F Cable
DC Power
Cord
Base
Station
Fully insert the Power Cable and Interface (I/F) Cable
Wall plug
Connector
AC/DC
Adapter
Gryphon™ I GD4100/GM4100/GBT 4100/L GD4300
Horizontal