Ack Character; Nak Character - Datalogic Gryphon I GD4100 Product Reference Manual
Gryphon series general purpose handheld linear imager or laser barcode readers
Hide thumbs
Also See for Gryphon I GD4100:
- Reference manual (428 pages) ,
- Product reference manual (370 pages) ,
- Quick reference manual (40 pages)
Table of Contents
Advertisement
RS-232/USB-Com Interfaces
ACK Character
This setting specifies an ASCII character or hex value to be used as the ACK character. ASCII
characters or any hex value from 0 to 0xFF can be selected. See
Select ACK Character Setting
NAK Character
This setting specifies an ASCII character or hex value to be used as the NAK character. ASCII
characters or any hex value from 0 to 0xFF can be selected.
Select NAK Character Setting
50
Setting to previously defined characters such as XON, XOFF, or host com-
mands conflicts with normal operation of these characters. 8-bit data is not
recognized when the option
DEFAULT
Setting to previously defined characters such as XON, XOFF, or host com-
mands conflicts with normal operation of these characters. 8-bit data is not
recognized when the option
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Data Bits
has been set as 7 Data Bits.
0x06 'ACK' Character
See
Data Bits
has been set as 7 Data Bits.
0x15 'NAK' Character
Gryphon™ I GD4100/GM4100/GBT 4100/L GD4300
page 287
for more information.
page 288
for more information.
Advertisement
Table of Contents
