Code 39 Set Length 2 - Datalogic Gryphon I GD4100 Product Reference Manual

Code 39

Code 39 Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Mode. Length includes the barcode's check, data, and full-ASCII shift characters. The length
does not include start/stop characters.
Table
this feature.
Table 3. Code 39 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Code 39Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
144
Variable Length
3
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 39 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Code 39 Length
Mode, or the second fixed length if in
page 297
EXAMPLES
07 Characters 15 Characters
'0' and '7'
50 = Length 2 is 50 Characters
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Control. Length 2 is the
Fixed Length
for detailed instructions on setting
50 Characters
'1' and '5' '5' AND '0'
CANCEL