Configuration Updates
Copy Configuration to Base Station
Scan the following label to copy the current scanner configuration to the Base Station. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time
configuration update to be performed on the Base Station.
Automatic Flash Update
This feature enables/disables the automatic flash update of a reader.
DEFAULT
Automatic Flash Update = Enable
264
Copy Configuration to Base Station
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this barcode.
This item is valid only with POS version of Base Station (model 4010).
ENTER/EXIT PROGRAMMING MODE
Automatic Flash Update = Disable
Gryphon™ I GD4100/GM4100/GBT 4100/L GD4300