Base Station Beep; Leash Alarm - Datalogic Gryphon I GD4100 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Base Station Beep

Enables/disables a beep indication when the handheld is placed in the Base Station.
BT Base Station Beep = Enable

Leash Alarm

This setting specifies the number of seconds to sound the Leash Mode beeps (three per second)
when the handheld goes out of range. This is especially useful in instances where the reader
might inadvertently have been placed in a bag or cart.
For this mode to be effective, reader must be linked to the Base Station and
on page 94
is no way for it to know where it is relative to the Base Station because communication is not
active between the devices.
DEFAULT
Leash Alarm = 1 Second
Product Reference Guide
must be disabled. If the reader is asleep or disconnected from the Base Station, there
Base Station Beep
BT Base Station Beep = Disable
DEFAULT
Sleep Mode Timeout
Leash Alarm = Disabled
Leash Alarm = 2 Seconds
261