Code 93
Code 93 Set Length 2
This feature specifies one of the barcode lengths for
maximum label length if in
Mode. Length includes the barcode's check, data, and full-ASCII shift characters. The length
does not include start/stop characters. The length can be set from 1 to 50 characters. A setting of
0 specifies to ignore this length (only one fixed length).
Table
setting this feature.
Table 23. CODE 93 Length 2 Setting Examples
STEP
ACTION
1
Desired Setting
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODE 93 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Code 93 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
232
Variable Length
23
provides examples for setting Length 2. See
00 (Ignore This
Length)
'0' and '0'
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Code 93 Length
Mode, or the second fixed length if in
page 297
EXAMPLES
07 Characters
15 Characters
'0' and '7'
50 = Length 2 is 50 Characters
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Control. Length 2 is the
Fixed Length
for detailed instructions on
50 Characters
'1' and '5'
'5' AND '0'
CANCEL