Data Format
Case Conversion
This feature allows conversion of the case of all alphabetic characters to upper or lower case.
DEFAULT
Case Conversion = Convert to upper case
Character Conversion
Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs
represented in hexadecimal ASCII values. The first character in the pair is the character that will
be converted. The second character in the pair is the character to convert to. If the character to
convert in a pair is FF, then no conversion is done.
90
Case conversion affects ONLY scanned barcode data, and does not affect Label
ID, Prefix, Suffix, or other appended data.
If less than the expected string of 16 characters are selected, scan the ENTER/
EXIT barcode twice to accept the selections and exit Programming Mode.
DEFAULT
(No character conversion)
ENTER/EXIT PROGRAMMING MODE
Case Conversion = Disable (no case conversion)
Case Conversion = Convert to lower case
Configure Character Conversion
0xFFFFFFFFFFFFFFFF
Gryphon™ I GD4100/GM4100/GBT 4100/L GD4300