Industrial 2 Of 5 Set Length 1; Industrial 2 Of 5 Set Length 2 - Datalogic Gryphon I GD4100 Product Reference Manual

Industrial 2 of 5

Industrial 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for
the minimum label length if in
Mode. Length includes the barcode's data characters only. The length can be set from 0 to 50
characters.
Table
instructions on setting this feature.
Table 12. Industrial 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Industrial 2 of 5 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
186
12
provides some examples for setting Length 1. See
00 Characters
'0' and '0'
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Industrial 2 of 5 Length
Variable Length Mode, or the first fixed length if in
EXAMPLES
07 Characters
'0' and '7'
01 = Length 1 is 1 Character
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Control. Length 1 is
Fixed Length
page 296
if you want detailed
15 Characters 50 Characters
'1' and '5' '5' AND '0'
CANCEL