ENTER/EXIT PROGRAMMING MODE
Batch Mode
This option specifies whether to store labels in the handheld while disconnected from the base.
Options are as follows:
•
Disabled — The handheld will not store/batch labels.
•
Automatic — The handheld will store labels to RAM when the handheld goes out of
range and is disconnected from the remote device.
•
Manual — The handheld will always store labels to Flash memory. The user must manu-
ally send the stored labels to the remote device using a special "batch send" label.
DEFAULT
Batch Mode = Automatic
Send Batch
Use this barcode to initiate sending of labels stored in batch memory.
Product Reference Guide
BATCH FEATURES
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction
with this barcode.
Send Batch
Batch Mode
Batch Mode = Disabled
Batch Mode = Manual
267