Gs1 Databar™ Expanded Set Length 2 - Datalogic Gryphon I GD4100 Product Reference Manual

GS1 DataBar™ Expanded
GS1 DataBar™ Expanded Set Length 2
This feature specifies one of the barcode lengths for
Length 2 is the maximum label length if in
in Fixed Length
from 1 to 74 characters. A setting of 0 specifies to ignore this length (only one fixed length).
Table
setting this feature.
Table 21. GS1 DataBar™ Expanded Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select GS1 DataBar™ Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
226
Mode. Length includes the barcode's data characters only. The length can be set
21
provides examples for setting Length 2. See
00 (ignore second
length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT GS1 DataBar™ EXPANDED LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
ENTER/EXIT PROGRAMMING MODE
GS1 DataBar™ Expanded Length
Variable Length Mode, or the second fixed length if
page 297
EXAMPLES
07 Characters 52 Characters
'0' and '7'
74 = Length 2 is 74 Characters
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
Control.
for detailed instructions on
74 Characters
'5' and '2' '7' and '4'
CANCEL