Msi Set Length 2 - Datalogic Gryphon I GD4100 Product Reference Manual

MSI

MSI Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Length
The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length).
Table
setting this feature.
Table 25. MSI Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT MSI LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
Select MSI Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not save the
entry string. You can then start again at the beginning.
240
Variable Length
Mode. Length includes the barcode's check, data, and full-ASCII shift characters.
25 provides examples for setting Length 2. See
00 (Ignore This
Length)
'0' and '0'
DEFAULT
ENTER/EXIT PROGRAMMING MODE
MSI Length Control
Mode, or the second fixed length if in
page 297
EXAMPLES
07 Characters 15 Characters
'0' and '7'
50 = Length 2 is 50 Characters
Gryphon™ I GD4100/GM4100/GBT4100/L GD4300
. Length 2 is the
for detailed instructions on
50 Characters
'1' and '5' '5' AND '0'
CANCEL
Fixed