Code 128 Set Length 2 - Datalogic Gryphon I GD4100 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Code 128 Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Mode. Length includes the barcode's data characters only.
The length can be set from 1 to 80 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table
this feature.
Table 5. Code 128 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
.
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
Product Reference Guide
Variable Length
5
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 128 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Code 128 Length
Mode, or the second fixed length if in
page 297
EXAMPLES
07 Characters 15 Characters
'0' and '7'
80 = Length 2 is 80 Characters
Code 128 Set Length 2
Control. Length 2 is the
Fixed Length
for detailed instructions on setting
80 Characters
'0' and 'F' '5' AND 0'
CANCEL
159