HP procurve series 4100gl Management And Configuration Manual page 256

Port-Based Virtual LANs (VLANs) and GVRP
Port-Based Virtual LANs (Static VLANs)
11-16
VLAN Commands Used in this Section
show vlans
show vlan <vlan-id>
max-vlans <1..30>
primary-vlan <vlan-id>
[no] vlan <vlan-id>
name <vlan-name>
[no] tagged <port-list>
[no] untagged <port-list>
[no] forbid
auto <port-list>
static-vlan <vlan-id>
Displaying the Switch's VLAN Configuration. The next command lists
the VLANs currently running in the switch, with VID, VLAN name, and VLAN
status. Dynamic VLANs appear only if the switch is running with GVRP
enabled and one or more ports has dynamically joined an advertised VLAN.
(In the default configuration, GVRP is disabled. (See "GVRP" on page 11-33.)
show vlan
Syntax:
Figure 11-12. Example of "Show VLAN" Listing (GVRP Enabled)
below
page 11-17
page 11-18
page 11-18
page 11-19
page 11-20
page 11-20
page 11-20
page 11-20
page 11-20 (Available if GVRP enabled.)
page 11-20 (Available if GVRP enabled.)
When GVRP is disabled
(the default), Dynamic
VLANs do not exist on
the switch and do not
appear in this listing.
(See "GVRP" on page
11-33.)